| MATERIAL SAFETY DATA SHEET |
LDA-445 |
| Better Engineering Mfg., Inc. |
Date: March 14, 2006 |
| SECTION 1: PRODUCT IDENTIFICATION |
Distributor: Better Engineering Mfg., Inc.
8361 Town Center Court
Baltimore, MD 21236 |
Emergency Phone: 800-535-5053 (INFOTRAC) |
|
| Trade Name: LDA-445 |
Product Type: Alkaline spray wash cleaner for industrial parts washing |
|
| SECTION 2: HAZARDOUS INGREDIENTS |
| LDA-445 contains no hazardous ingredients per 29 CFR 1910. Better Engineering submits this MSDS to assure our customers that we are aware of our obligations under OSHA. |
|
|
| SECTION 3: PHYSICAL DATA |
| Boiling Point (ºF): > 210 |
Specific gravity (H20 = 1.0): 1.03 |
| Vapor Pressure (mm/Hg): N/D |
Vapor Density (air = 1.0): N/D |
| Solubility in water: Complete |
|
| Evaporation rate (vs. H20): N/D |
Appearance and odor: Clean amber, mild odor. |
|
| SECTION 4: FIRE AND EXPLOSION HAZARD DATA |
| Flash Point (T.C.C.): None |
Flammable limits: N/A |
| Extinguishing media: N/A |
Unusual fire and explosion hazards: None |
| Special fire fighting procedures: None |
|
|
| SECTION 5: REACTIVITY DATA |
| Stability: Stable; hazardous polymerization will not occur. |
|
| Incompatibility: strong oxidizing agents, nitrites, or nitrite containing compound. |
| Hazardous Decomposition Products: When exposed to fire, produces normal products of combustion. |
|
| SECTION 6: HEALTH HAZARDS |
| Primary routes of exposure: (x) Eyes (x) Skin (x) Oral (x) Inhalation () Other |
| Sign and Symptoms of Overexposure (Acute): Skin and eye irritation |
| Sign and Symptoms of Overexposure (Chronic): None known |
| Medical Conditions Aggravated by Overexposures: None known |
| Carcinogen or Suspect Carcinogen: None |
|
| SECTION 7: EMERGENCY FIRST AID PROCEDURES |
| Eyes: In case of contact with eyes, flush with water for 15 minutes. Consult a physician immediately. |
| Skin: Flush affected area with water for 15 minutes. If irritation persists, consult a physician. |
| Ingestion: If large quantities are swallowed, drink lukewarm water (never give anything to an unconscious person). Do not induce vomiting. Seek medical attention immediately. |
| Inhalation: If overcome by overexposure, remove victim to fresh air. Give oxygen or artificial respiration if needed. Seek medical attention immediately. |
|
| SECTION 8: SPECIAL PROTECTION INFORMATION |
| Steps to be taken in case material is released or spilled: Soak up excess with chemical absorbent. Place in suitable container. Flush spill area well with large amounts of water. |
| Waste Disposal Method: Package, store, transport and disclose of all product waste according to all applicable federal, state and local regulations. |
| Protections to be taken in handling and storing: Keep container closed when not in use. |
|
| SECTION 9: CONTROL MEASURES |
| Respiratory protection (specify type): None usually needed |
| Ventilation requirements: Local Exhaust |
|
Other Protection: Always wear gloves, safety glasses and protective clothing.
|
Specializing in parts washers, parts cleaning, ultrasonic cleaning, degreasers, conveyor washers and belt washers.
