THE CYCLOJETS

Using detergents and water, the CYCLOJETS clean and dry parts that other parts washers can’t – complex screw machine parts and larger parts with blind holes and intricate passage ways. Parts that can tumble are put in covered baskets. Parts that need to orbit without tumbling are “locked” into covered racks or a fixture.

Easy Loading, Rotary Action

The operator simply slides the baskets (fixtures) into the parts washer's rotor (no bending or lifting), presses the palm buttons to close the door, and then presses the touch screen to start the cleaning cycle. When the rotor starts to turn, the patented auto latch feature holds the baskets in place.

In cycle, the baskets orbit around a horizontal axis (the rotation speed is variable). During the immersion stages, the baskets come completely out of the solution and then are completely immersed again to rip away contaminants and flush out passageways.

Spray, Immersion, Ultrasonics

Usually, you have to choose between these cleaning methods but with a Cyclojet parts washer you can have it all! In a given cycle, you can wash your parts with spray, immersion, and ultrasonic actions and do the same during the rinse phase of the cleaning cycle.

UP TO (9) CLEANING STAGES AT YOUR FINGER TIPS
SPRAY-WASH (standard)	IMMERSION WASH (standard)	ULTRASONIC-WASH (optional)

SPRAY RINSE (standard)	IMMERSION RINSE (standard)	ULTRASONIC-RINSE (optional)

SPRAY-RINSE (fresh) (optional)	AMBIENT-DRY (optional)	HOT AIR-DRY (optional)

Total Cycle Flexibility

Better Engineering’s PLC software offers incredible flexibility. Choosing from a library of nine (9) cleaning stages, you can create and pre-program any cycle you want. Choose as many stages as you want, put them in any order you want, repeat a stage if you like, and select any stage duration. The fresh rinse water can go to any tank or drain you wish.

The Immersion Stages

During the immersion stages, filtered water is continuously being pumped into the cleaning chamber at 60 – 100 GPM. This same amount of water overflows the cleaning chamber of the parts washer, flushing out floating oils and suspended chips. In effect, the immersion bath is being changed over with filtered solution every thirty (30) seconds.

The “immersion wash” stage has spray under immersion for additional cleaning action. The 60 – 100 GPM input is blasting beneath the submerge baskets, creating what amounts to a boiling cauldron.

Two Models

The first model is the Cyclojet 2 parts washer which holds two(2) baskets. The 2nd model is the Cyclojet 4 parts washer which holds four(4) baskets. Otherwise, these models have the same sleek look and have the same great features which include a convenient loading deck, slide-in baskets, two(2) large solution tanks, auto latching, stainless steel construction, PLC controls, etc...

PHOTO GALLERY - Cyclojet Systems & Features

CLICK ON ANY PICTURE BELOW TO ENLARGE