Thursday, 30 August 2018 by Brenda Bennett
This C-42 conveyor washer cleans and sanitizes medical waste containers. The containers are emptied, washed in the C-42, and then get re-distributed to hospitals and medical facilities. The C-42 has three stages: wash, rinse/sanitize (+180° F) and dry. A chain conveyor with pushers and guide rails move the containers through the three stages. The work
Tagged under: medical waste cleaning; sanitizing
This manufacturer produces Lithium batteries for commercial purposes. The product range being cleaned consists of three sizes of Lithium batteries roughly the size of AA, C and D cell batteries. The battery cells are placed in pucks according to size. The washer was designed to receive the pucks from a Flex Link conveyor and route
This conveyor washer is designed to clean multiple sizes of plastic totes. To prevent the totes from getting blown off the conveyor belt, the system has “floating” hold-down rails that hinge up and down as the tote heights change (no manual adjustment is needed.) The C-24 has a wash module and an extra powerful heated
Tagged under: sanitizing
C-6000-PCS Carousel….Robot load/ unload This Carousel system cleans diesel engine pistons inside and out including a cavity that only has access via two (2) small, ¼” diameter holes. Parts are robotically loaded and unloaded from the same front position. The turntable indexes every 45 seconds moving the parts through the wash, rinse, and dry zones.