Genesis Washers
Parts Washers that give the MAXIMUM CLEANING POWER in the SMALLEST FOOTPRINT!
The Genesis Series is state-of-the-art and includes two immersion and three jet washer models.
One great machine series… five great different models to choose from! The Genesis Series is state of the art and includes two immersion and three jet washer models and is ideal for cleaning automotive parts such as brakes, transmissions, engine blocks, and more. Features include:
- Roll-in door
- Ergonomic loading height
- Jam-proof, chain driven turntable drive
- Control panel with 30-minute washer timer, 12-heat timer and adjustable thermostat
- Mid-swing manifold to accommodate various part heights
- High volume, industrial centrifugal pumps
G-500 Genesis Micro Immersion Parts Washer
SMALL AND POWERFUL!
The G-500 is a stainless steel automatic parts washer that is small enough to fit on a workbench (support stand is optional) and large enough (24” x 14” x 8” high work envelope) to clean most parts. Simply plug the G-500 into a 110-volt outlet and you are ready to clean your parts in a hot water and detergent bath.
The hallmark feature of the G-500 is a rack and lever system that allows the parts to be easily lowered into the hot bath without ever getting your hands wet. Once under water, air agitates the solution to create a violent scrubbing action. With the rack in the “up” position, parts are illuminated with an overhead LED light so they can be closely examined and detailed with a flow-thru hand brush, and optional fresh rinse and blow-off guns.
- Stainless steel construction
- 24” L x 14” W x 8” H work envelope
- Immersion depth 8”
- Bath turbulation using compressed air
- Cantilevered handlebar for raising and lowering the rack into the bath
- Rack pops-out for easy tank cleaning
- Overhead LED light
- 7 day/ 24 hour timer to automatically turn power on and off (for advance heating)
- Low water sensor and shut off (to protect water heater)
- Built-in oil skimming
- Flow-through brush and pump (pump sends wash solution through the brush
- Control switches for light, heat, and brush pumps
- Plug for everyday 110 V, 15 amp outlet
- Rugged stand made from precision aluminum extrusions
- Same stand but with middle shelf and Lexan hinged door
- Lexan doors for the cabinet to reduce water evaporation and offer an added level of safety
- Rinse gun to rinse parts with fresh water (acts as make-up water for wash tank)
- Air blow-off gun
G-1000 Genesis Immersion Parts Washer
SINGLE STAGE IMMERSION WASHER
The G-1000 is the ideal immersion washer for small to medium size parts. The hallmark feature is a powered platform (24” x 18”) with high-speed oscillation under water (immersion depth is 12”). With the G-1000, the operator simply loads the parts, starts the cycle, and walks away. In cycle, the platform lowers the parts into a heated bath and then starts to oscillate up and down at 200 strokes (100 full oscillations) per min. This agitation in the heated detergent and water solution cleans your parts, inside and out, while underwater compressed air nozzles create additional turbulence. An optional side tray offers you additional space for close inspection and hand detailing. This tray includes a flow-through brush and pump, using the same heated solution.
- Stainless steel tank
- Modular construction; tank can be unbolted and replaced
- 24” long x 18” wide platform, powered with pneumatic cylinder
- Platform agitation up to 200 strokes (100 full oscillations)/min.
- Immersion depth: 12”
- Bath turbulation using compressed air
- Hinged cover
- Timers for heaters and oscillation cycles
- Filter/ regulator for the compressed air connection
- NEMA 12 control panel
- 30-minute wash timer
- 12-hour timer for tank heaters
- 230 V, 1-pH power
- Automatic low water shut down and fill
- Automatic oil skimmer (must order low water shut down/fill)
- Removable parts basket: 22” x 14” x 1” with handles
- Side work station: 24” x 18” work area, drip basin, backsplash
- Overhead LED light
- Flow through brush and pump
- 7 day/ 24 hour timer to automatically turn power on and off (for advance heating)
- Gun to rinse parts with fresh water (acts as make-up water for wash tank)
- Air blow-off gun (to dry parts with compressed air)
- All wetted parts stainless steel
- 230 V, 3-pH power
G-1500 Genesis Parts Washer
COMPACT JET WASHER CLEANING
The g-1500 is the most compact of our jet washer line with a 22″ diameter turntable. Features include the roll-in door, a high volume pump, jam-free turntable drive system, slide-out filter basket, sealed cleaning chamber, etc.
- 22″ Diameter turntable
- 22″ Working height
- 40″ Load height
- Roll-away door
- Industrial, High Volume Pump
- Jam-proof turntable drive
- 30-minute wash timer
- 12-hour heat timer
- Mid-swing cleaning manifold
- Stainless steel “V” jet spray nozzles
- Sealed cleaning chamber
- NEMA 12 control panel
- Removable filter basket
- Casters
- 230-Volt/3-phase power
- Automatic low water shut-down and fill
- Oil skimmer
- Automatic 7-day/24-hour timer
- Brush & pump for hand cleaning
- Hydro-air rinse gun
- Small parts basket with hinged lid
- 460 Volt/3-phase power
G-2000 Genesis Parts Washer
MAXIMUM CLEANING POWER IN SMALLEST FOOTPRINT!
Automatic jet-spray parts washer designed to give a customer maximum cleaning power in the smallest possible footprint. Features include the roll-in door, a vertical (seal-less) pump, automatic water level controls, jam-free turntable drive system, oil skimmer, slide-out filter basket, etc.
- 27″ Diameter turntable
- 35″ Working height
- 29″ Load height
- Roll-away door
- Vertical (seal-less) pump
- Jam-proof turntable drive
- 30-minute wash timer
- 12-hour heat timer
- Mid-swing cleaning manifold
- Stainless steel “V” jet spray nozzles
- Sealed cleaning chamber
- NEMA 12 control panel
- Removable filter basket
- 230 Volt/3-phase power
- ZXG Upper turntable
- Automatic low water shut-down and fill
- Oil skimmer
- Automatic 7-day/24-hour timer
- In-line strainer
- In-line bag filter
- Steam exhaust
- Casters
- Brush & pump for hand cleaning
- Hydro-air rinse gun
- Small parts basket with hinged lid
- Parts tree for hanging small parts
- 460V 3-phase power
G-3000 Genesis Parts Washer
MAXIMUM CLEANING POWER IN SMALLEST FOOTPRINT!
Automated parts washer with powerful spray nozzles designed to give a customer maximum cleaning power in the smallest possible footprint. Features include the roll-in door, a vertical (seal-less) pump, automatic water level controls, jam-free turntable drive system, oil skimmer, slide-out filter basket, etc.
- 37″ Diameter turntable
- 48″ Working height
- 29″ Load height
- Roll-away door
- Vertical (seal-less) pump
- Jam-proof turntable drive
- 30-minute wash timer
- 12-hour heat timer
- Mid-swing cleaning manifold
- Stainless steel “V” jet spray nozzles
- Sealed cleaning chamber
- NEMA 12 control panel
- Removable filter basket
- 230 Volt/3-phase power
- ZXG Upper turntable
- Automatic low water shut-down and fill
- Oil skimmer
- Automatic 7-day/24-hour timer
- In-line strainer
- In-line bag filter
- Steam exhaust
- Brush & pump for hand cleaning
- Hydro-air rinse gun
- Small parts basket with hinged lid
- Parts tree for hanging small parts
