Showing all 2 results
G-1000 Genesis Immersion Parts Washer
The G-1000 is the ideal immersion washer for small to medium size parts. The hallmark feature is a powered platform (24” x 18”) with high speed oscillation under water (immersion depth is 12”). With the G-1000, the operator simply loads the parts, starts the cycle and walks away. In cycle, the platform lowers the parts into a heated bath and then starts to oscillate up and down at 200 strokes (100 full oscillations) per min. This agitation in the heated detergent and water solution cleans your parts , inside and out, while underwater compressed air nozzles create additional turbulence.
Contact us for a quote!
(Picture shown with optional side work station.)
G-500 Genesis Micro Immersion Parts Washer$2,995.00
The G-500 (stainless steel) is an automatic parts washer that is small enough to fit on a work bench (support stand is optional) and large enough (24” x 14” x 8” high work envelope) to clean most parts. Simply plug the G-500 into a 110 volt outlet and you are ready to clean your parts in a hot water and detergent bath.
The hallmark feature of the G-500 is a rack and lever system that allows the parts to be easily lowered into the hot bath without ever getting your hands wet. Once under water, air agitates the solution to create a violent scrubbing action. With the rack in the “up” position, parts are illuminated with an overhead LED light so they can be closely examined and detailed with a flow-thru hand brush, and optional fresh rinse and blow-off guns.
*Model G-500 pictured with optional fresh rinse and blow-off guns. HDS-11/ HDS-22 support stands not shown.