Cosmetic Pails Drums Parts Cleaning – Case Study 21155

return conveyor barrel pail washer
Conveyor Washer for Cosmetic Drums Pails
Conveyor Washer for Cosmetic Drums Pails

Background:

At cosmetic companies, the make-up constituents are stored in plastic pails and drums. These need to be cleaned after each use. This company cleaned the containers manually using a hand-held a pressure washer. The result was a mess in more ways than one.

Parts Cleaning Challenge:

Design a conveyor washer that could clean 5 gallon pails as well as 55 gallon drums. The system had to wash and rinse the containers, fit in a really tight room and have a return conveyor so that one operator can load and unload the parts.

Solution/System:

This two (2) stage, stainless steel return conveyor washer has hinged side rails that fold down to secure the smaller pails and a CIP system for the wash and rinse tanks.

Sanitization Parts Washer – Case Study 21154

Sanitary Cosmetic Parts Washer
Sanitization Washer
Sanitization Washer

Background:

This company is a global cosmetics and personal care products manufacturer.

Parts Cleaning Challenge:

The filling machines at cosmetic companies have to be torn down and meticulously cleaned on a regular basis. This company needed a system to automate the cleaning and sanitizing of components.

Solution/System:

The solution was a CE-3000-SAN stainless steel sanitary spray washer with a 37″ diameter turntable and 48″ working height. This machine cycles through a wash stage and at least two (2) rinse stages. The wash solution can be saved and dumped after “X” cycles. Cabinet is hygienic-by-design and the roll-in door exposes a portion of turntable for ergonomic loading of larger volume containers by the operator as well as minimizes overall footprint.