3 October 2016

Drum Washer for Large Volume Cleaning

by bettereng1neer1ng / No Comments

The D-24 rotary drum washer is designed to automatically receive large batches of small parts from an assembly line. The pharmaceutical parts are sanitized and processed through wash, rinse and dry cycles.  The sides of the washer can be removed and the drum barrel taken out and transferred to a stainless steel cart for easy […]

Read More

3 October 2016

Conveyor Tote Washer

by bettereng1neer1ng / No Comments

This C-42 conveyor washer cleans and sanitizes medical waste containers.  The containers get dumped, washed in the C-42 and then get re-distributed to hospitals and medical facilities.  The C-42 has three stages: wash, rinse/sanitize (+180° F) and dry.   The work envelop is 42″ wide x 40″ high. This system is all stainless steel, the […]

Read More

27 September 2016

Sanitization Spray Parts Washer

by bettereng1neer1ng / No Comments

At cosmetic companies, the filling machines have to be torn down and meticulously cleaned on a regular basis. Challenges include: a) cleaning off tenacious substances such as water -proof mascara; b) fixturing for a myriad of parts… bowls, funnels, tubes, clamps, etc. This CE-3000-SAN stainless steel spray washer, which has a 37″ diameter turntable and […]

Read More

12 August 2015

Cleaning Pharma Capsule Printers – Case Study 20667

by bettereng1neer1ng / No Comments

Background: This company makes the empty capsules that other companies use for their pharmaceuticals. Parts Cleaning Problem: The print on these tiny capsules is applied by special printing machines.  These machines need to be cleaned on a regular basis.  The machinery gets completely torn down and every component is methodically washed.  This was being done […]

Read More

12 August 2015

Sanitization Parts Washer – Case Study 21154

by bettereng1neer1ng / No Comments

Background At cosmetic companies, the filling machines have to be torn down and meticulously cleaned on a regular basis. This company has always hand cleaned their components using a team of workers. They were ready for a change. Parts Cleaning Problem The challenges included: a) cleaning off tenacious substances such as water -proof mascara; b) […]

Read More

12 August 2015

Cosmetic Pails Drums Parts Cleaning – Case Study 21155

by bettereng1neer1ng / No Comments

Background At cosmetic companies, the make-up constituents are stored in plastic pails and drums. These need to be cleaned after each use. This company cleaned the containers manually using a hand-held a pressure washer. The result was a mess in more ways than one. Parts Cleaning Problem Design a conveyor washer that could clean 5 […]

Read More

12 August 2015

Drum Washer for Pharmaceutical Industry – Case Study 21429

by bettereng1neer1ng / No Comments

D-24 Rotary Drum Washer This cleaning system cleans small rubber parts after punch-out. Parts are automatically loaded and the drum tumbles the parts through the system. The parts are washed, dried, and then move onto the next stage. The D-24 has a super “clean design” to maintain sanitary conditions. All areas of the machine are […]

Read More