3 October 2016

Immersion Parts Washer with 6 Baskets

by bettereng1neer1ng / No Comments

This CJ-6 Immersion Washer is designed to clean fittings, tubes and valves manufactured for the HVAC, plumbing, refrigeration and industrial sectors.  The manufacturer needed to clean large batches of small, heavy metal parts that had through holes and blind holes. The immersion washer has 6 baskets with a total load capacity of 420 lbs. that […]

Read More

3 October 2016

Immersion Washer for Small Pipe Fittings

by bettereng1neer1ng / No Comments

The Cyclojet CJ-4 immersion washer rotor was customized to fit the customer’s 5 cubic foot basket with a load capacity of 700 lbs., which holds their various parts such as pipes, fittings, couplings and gaskets.  The system cycles through wash, rinse and dry stages and all wetted parts are stainless steel.

Read More

3 October 2016

Large Conveyor Washer 48″ Wide, 36″ IVC

by bettereng1neer1ng / No Comments

Conveyor washer with 48″ wide belt and 36″ inside vertical clearance used in powertrain production assemblies. Belt withstands 100 lbs. per linear foot. The 3-stage, wash/rinse/dry, system includes hinged access doors, adjustable air knives, an electronic eye to automatically stop parts at the unload end as well as a 20HP motor for the heated dry.

Read More

3 October 2016

Belt Washers for Stampings

by bettereng1neer1ng / No Comments

These C-14 conveyor washers clean metal stampings at high speed.  A top hold-down belt lays on the parts to keep them from blowing off the carrier belt. The belt washers are stainless steel, portable, and have wash, rinse, and dry stages.

Read More

27 September 2016

Precision Cleaning System for Jet Engine Parts

by bettereng1neer1ng / No Comments

Twin systems, model RD-6000-PCS, designed for final, precision cleaning of critical jet engine components. These aircraft parts cleaning systems have a roll-in door and a spray/dry manifold that automatically lowers into the parts. Both the interior and exterior surfaces are directly impacted as the machines cycle through the following stages… wash, rinse, fresh rinse, and […]

Read More

27 September 2016

145-Inch Diameter Turntable Parts Washer

by bettereng1neer1ng / No Comments

Designed to clean parts for the Wind Power industry, this RD-14000-PCS parts washer has a 145″ diameter turntable with a custom “C”-shaped manifold that swings out and lowers over the bearing race to encircle it on 3 sides. Using water-based solutions, the manifold underneath the turntable sprays the bearing races from the bottom to ensure […]

Read More

27 September 2016

90″ Diameter Roll-in Door Parts Washer

by bettereng1neer1ng / No Comments

The model RD-9000-PCS precision cleaning system has a 90 inch diameter turntable that can hold up to a 10,000 lb. load and 75 inch working height. This particular unit is cleaning large compressor castings prior to paint. This is a three-stage system: wash/phosphate, recirculated rinse and a final fresh rinse. Other features of the system […]

Read More

27 September 2016

Metal Coating Cleaning Turntable Washer

by bettereng1neer1ng / No Comments

This parts washing system cleans baskets used in the coating process for automotive fasteners. The tumbling baskets are cone shaped and perforated while other baskets are rectangular and made of woven wire. The F-4000 has a 3-stage cleaning cycle… heated wash, heated rinse and dry. A center spray manifold moves easily into position with a […]

Read More

17 March 2016

Better Engineering Company Profile

by bettereng1neer1ng / No Comments

From Visibly Clean to Microscopically Clean, Better Engineering Mfg. Inc. remains the World Leader in Aqueous Cleaning Systems! Regardless of whether you have a simple or complex cleaning application, whether you require a small or a large system, or if you need a standard parts washer or a customized washing system, Better Engineering has a variety […]

Read More

17 March 2016

Cyclojet Tumbling Cleaning System

by bettereng1neer1ng / No Comments

Using detergents and water, the CYCLOJETS clean and dry parts that other parts washers can’t…  complex screw machine parts and larger parts with blind holes and intricate passage ways. These systems combine a tumbling/orbital motion with spray and immersion to flush-out chips and strip-off oils from the most complex parts.  Parts that can tumble are […]

Read More