Shop Better Engineering
Shop
Showing 1–12 of 17 results
-
Read moreMORE INFOG-1000 Genesis Immersion Parts Washer
The G-1000 is the ideal immersion washer for small to medium size parts. The hallmark feature is a powered platform (24” x 18”) with high speed oscillation under water (immersion depth is 12”). With the G-1000, the operator simply loads the parts, starts the cycle and walks away. In cycle, the platform lowers the parts into a heated bath and then starts to oscillate up and down at 200 strokes (100 full oscillations) per min. This agitation in the heated detergent and water solution cleans your parts , inside and out, while underwater compressed air nozzles create additional turbulence.
Contact us for a quote!(Picture shown with optional side work station.)
-
Read moreMORE INFO
G-1500 Genesis Parts Washer
The G-1500 is designed to give a customer maximum cleaning power in the smallest possible footprint. Features include the roll-in door, a high volume pump, jam-free turntable drive system, slide-out filter basket, sealed cleaning chamber, etc.
Contact us for a quote!
-
Read moreMORE INFO
G-2000 Genesis Parts Washer
Automatic parts washer designed to give a customer maximum cleaning power in the smallest possible footprint. Features include the roll-in door, a vertical (seal-less) pump, automatic water level controls, jam-free turntable drive system, oil skimmer, slide-out filter basket, etc.
Contact us for a quote!
-
Read moreMORE INFO
G-3000 Genesis Parts Washer
Automatic parts washer designed to give a customer maximum cleaning power in the smallest possible footprint. Features include the roll-in door, a vertical (seal-less) pump, automatic water level controls, jam-free turntable drive system, oil skimmer, slide-out filter basket, etc.
Contact us for a quote!
-
Add to cartMORE INFO
G-500 Genesis Micro Immersion Parts Washer
$3,990.00The G-500 (stainless steel) is an automatic parts washer that is small enough to fit on a work bench (support stand is optional) and large enough (24” x 14” x 8” high work envelope) to clean most parts. Simply plug the G-500 into a 110 volt outlet and you are ready to clean your parts in a hot water and detergent bath.
The hallmark feature of the G-500 is a rack and lever system that allows the parts to be easily lowered into the hot bath without ever getting your hands wet. Once under water, air agitates the solution to create a violent scrubbing action. With the rack in the “up” position, parts are illuminated with an overhead LED light so they can be closely examined and detailed with a flow-thru hand brush, and optional fresh rinse and blow-off guns.*Model G-500 pictured with optional fresh rinse and blow-off guns. HDS-11/ HDS-22 support stands not shown.
-
Add to cartMORE INFO
HDL-125 Parts Cleaning Detergent
$135.00A multi-metal safe, free-rinsing, heavy duty liquid detergent typically used to clean industrial equipment parts, engine parts and screw machine parts. Its low foaming action is designed to remove heavy & light oils, greases, light carbon deposits and other contaminants.
-
Add to cartMORE INFO
LDA-445 Parts Cleaning Detergent
$170.00A multi-metal safe, free rinsing amine liquid detergent typically used to clean newly machined parts, screw machine parts, printed circuit boards and finished products. Its low foaming action is designed to remove light oils, chips, light flux and other contaminants.
-
Add to cartMORE INFO
LDN-225 Parts Cleaning Detergent
$230.00A multi-metal safe, free rinsing nitrite liquid detergent typically used to clean newly machined parts, screw machine parts, printed circuit boards and finished products. Its low foaming action is designed to remove light oils, chips, light flux and other contaminants.
- 1
- 2