27 September 2016

Jam-proof Roll-in Door 27″ Diameter Turntable Washer

by bettereng1neer1ng / No Comments

The G-2000 (featured) and G-3000 automatic parts washers are designed to give maximum cleaning power in the smallest possible footprint. Features include roll-in door, jam-free turntable drive system, a vertical (seal-less) pump, slide-out filter basket, specific Lifetime Guarantees and more.  Ideal for automotive parts cleaning – brakes, gears, rods, transmissions, etc. – repair/maintenance operations, and […]

Read More

27 September 2016

Precision Cleaning System for Jet Engine Parts

by bettereng1neer1ng / No Comments

Twin systems, model RD-6000-PCS, designed for final, precision cleaning of critical jet engine components. These aircraft parts cleaning systems have a roll-in door and a spray/dry manifold that automatically lowers into the parts. Both the interior and exterior surfaces are directly impacted as the machines cycle through the following stages… wash, rinse, fresh rinse, and […]

Read More

27 September 2016

145-Inch Diameter Turntable Parts Washer

by bettereng1neer1ng / No Comments

Designed to clean parts for the Wind Power industry, this RD-14000-PCS parts washer has a 145″ diameter turntable with a custom “C”-shaped manifold that swings out and lowers over the bearing race to encircle it on 3 sides. Using water-based solutions, the manifold underneath the turntable sprays the bearing races from the bottom to ensure […]

Read More

27 September 2016

Sanitization Spray Parts Washer

by bettereng1neer1ng / No Comments

At cosmetic companies, the filling machines have to be torn down and meticulously cleaned on a regular basis. Challenges include: a) cleaning off tenacious substances such as water -proof mascara; b) fixturing for a myriad of parts… bowls, funnels, tubes, clamps, etc. This CE-3000-SAN stainless steel spray washer, which has a 37″ diameter turntable and […]

Read More

27 September 2016

90″ Diameter Roll-in Door Parts Washer

by bettereng1neer1ng / No Comments

The model RD-9000-PCS precision cleaning system has a 90 inch diameter turntable that can hold up to a 10,000 lb. load and 75 inch working height. This particular unit is cleaning large compressor castings prior to paint. This is a three-stage system: wash/phosphate, recirculated rinse and a final fresh rinse. Other features of the system […]

Read More

27 September 2016

Parts Washer With 15,000 lbs. Load Capacity

by bettereng1neer1ng / No Comments

This model F-10000LX-P-SS turntable parts washer has a 100-inch diameter turntable, a 15,000 lbs. load weight capacity, and a 72-inch working height. It is a 3-stage (wash, rinse, dry) system. Increased diameter and weight capacity designed to handle the maintenance and repair of military Tactical Wheeled Vehicles (tanks and armored personnel carriers.) The unit is […]

Read More

27 September 2016

Cleaning Car Parts – Jay Leno’s Garage

by bettereng1neer1ng / No Comments

Better Engineering Sales Manager, Carl Martin, stops by Jay Leno’s Garage to demo Better Engineering’s automatic turntable-style aqueous parts washer – made in America!  (NBC-Universal Studios)

Read More

27 September 2016

Metal Coating Cleaning Turntable Washer

by bettereng1neer1ng / No Comments

This parts washing system cleans baskets used in the coating process for automotive fasteners. The tumbling baskets are cone shaped and perforated while other baskets are rectangular and made of woven wire. The F-4000 has a 3-stage cleaning cycle… heated wash, heated rinse and dry. A center spray manifold moves easily into position with a […]

Read More

17 March 2016

Better Engineering Company Profile

by bettereng1neer1ng / No Comments

From Visibly Clean to Microscopically Clean, Better Engineering Mfg. Inc. remains the World Leader in Aqueous Cleaning Systems! Regardless of whether you have a simple or complex cleaning application, whether you require a small or a large system, or if you need a standard parts washer or a customized washing system, Better Engineering has a variety […]

Read More

17 March 2016

Cyber-Jets Conveyor Parts Washing System

by bettereng1neer1ng / No Comments

Do you need a heavy-duty conveyor washer? Better Engineering conveyor parts washing systems are designed with stainless steel construction inside and out and come in standard belt widths of 14″, 24″, 36″ or 48″. Custom widths are available. All systems are completely modular… from single stage to multiple stages (5, 6, or more), you can […]

Read More