C-6000-PCS Carousel….Robot load/ unload This Carousel system cleans diesel engine pistons inside and out including a cavity that only has access via two (2) small, ¼” diameter holes. Parts are robotically loaded and unloaded from the same front position. The turntable indexes every 45 seconds moving the parts through the wash, rinse, and dry zones.
Transmission Housing Cleaning The RTO-2000 is the perfect parts washer for a work cell. The operator loads a part, rolls the dolly into the chamber, and uses push-button controls to close the door and start the cycle. In cycle, the part rotates and water is blasted into key passageways. In just 3 minutes, the part is
Conveyor Washers for Camshafts, Crankshafts and Engine Blocks Two (2) identical conveyor washers with custom fixturing – one designed to hold camshafts and crankshafts and the other to clean engine blocks. These systems wash, rinse, and dry 120 parts, or sets of parts, every hour (the next step is assembly.) Electronic sensors and operator flag
CJ-2 Tumbling Washer with Automated Conveyor This CJ-2 cleans fuel injector parts to the highest possible standards. This system cleans trays of parts since this is how they are normally handled in the manufacturing plant. The operator places a tray (single or double stacked) on the blue conveyor belt and walks away. The conveyor then
C-14 Conveyor Washer with 360 Degree Track This Cyberjet C-14 is a fully automated parts washing system that cleans diesel engine camshafts. A single robot loads and unloads the camshafts on one end of the system. Once a camshaft is loaded onto a fixture, the fixture is released and the part travels around the tight