4 October 2016

“Impulse” Spray Washers for Long Parts

by bettereng1neer1ng / No Comments

The Impulse style parts washers are ideal for long parts such as shafts, rollers, diesel engine blocks, etc.  The spray chamber tops are powered up and down.  The spray manifolds can rotate around the parts or sweep back and forth.

Read More

4 October 2016

Industrial Parts Washer for Diesel Engine Blocks

by bettereng1neer1ng / No Comments

This system cleans diesel engine blocks that are as large as 132″ long x 44″ wide x 46″ high and that weigh up to 16,000 lbs. When the powered lid is open, there is full access for crane loading with room to spare. In cycle, the spray manifolds sweep back and forth across the part […]

Read More

3 October 2016

Ideal Parts Washer for Work Cell

by bettereng1neer1ng / No Comments

The RTO-2000 is the perfect parts washer for a work cell. The operator loads a part, rolls the dolly into the chamber, and uses push button controls to close the door and start the cycle. In cycle, the part rotates and water is blasted into key passageways. In just 3 minutes the part is clean […]

Read More

3 October 2016

Powered Parts Washer Flushes Tube Assemblies

by bettereng1neer1ng / No Comments

This RTO-2000-PCS (Precision Cleaning System) unit automatically flushes the ID’s of this tube assembly and cleans the outsides of the parts. The unit sequences through a 3 stage cycle (heated wash, heated rinse, hot air dry) in just 15 minutes. Eighteen(18) parts are cleaned per cycle. Features include stainless steel construction, powered vertical door, powered dolly, […]

Read More

3 October 2016

Industrial Parts Washer for Gas Cylinders Robotically Loaded

by bettereng1neer1ng / No Comments

This extraordinary machine cleans/ passivates gas cylinders inside and out. The system has six (6) individual cleaning chambers, each with a powered door and automatic valves to control flows from 3 tanks and air blow-off. The parts are loaded and unloaded with a robot. A top pneumatic device secures the part before the robot lets […]

Read More

3 October 2016

8-Basket Tumbling Washer

by bettereng1neer1ng / No Comments

Using spray and immersion technology, the CJ-8 tumbling washer cleans 8 basket loads of parts per cycle, or 24 baskets per hour (each basket measures approx. 18″ x 12″ x 6″.) Parts being cleaned are security locks during the manufacturing process. In cycle, the rotor spins to tumble the parts within the baskets. The machine […]

Read More

3 October 2016

Orbital Parts Washer

by bettereng1neer1ng / No Comments

The Cyclojet 2 is a water-based, precision cleaning system designed to wash screw machine parts and larger parts with blind holes and intricate passageways. This system combines a tumbling/orbital motion with spray and immersion to flush-out chips and strip-off oils from the most complex parts in an average time of 2-15 minutes.

Read More

3 October 2016

Immersion Washer for Small Pipe Fittings

by bettereng1neer1ng / No Comments

The Cyclojet CJ-4 immersion washer rotor was customized to fit the customer’s 5 cubic foot basket with a load capacity of 700 lbs., which holds their various parts such as pipes, fittings, couplings and gaskets.  The system cycles through wash, rinse and dry stages and all wetted parts are stainless steel.

Read More

3 October 2016

Parts Cleaning Small Weapons Frames

by bettereng1neer1ng / No Comments

This C-24 loop conveyor washer is designed to clean trays of gun parts. The oval conveyor allows one operator to easily load and unload the trays from one vantage point. The sequence is as follows: 1) place a tray on gravity rollers and slide it onto the demagnetizing unit; 2) tray is then powered through […]

Read More

3 October 2016

Conveyor Washer for Large Metal Stampings

by bettereng1neer1ng / No Comments

This high speed (45 FPM) C-48-S15/ S15 conveyor washer removes heavy lubricant and black residue from hot rolled steel dome covers for pressure tanks.  A large portion of these parts are as large as 48″ dia. x 16″ high.  The conveyor washer is 50″ wide x 19″ high work envelope to accommodate the parts. This […]

Read More