3 October 2016

8-Basket Tumbling Washer

by bettereng1neer1ng / No Comments

Using spray and immersion technology, the CJ-8 tumbling washer cleans 8 basket loads of parts per cycle, or 24 baskets per hour (each basket measures approx. 18″ x 12″ x 6″.) Parts being cleaned are security locks during the manufacturing process. In cycle, the rotor spins to tumble the parts within the baskets. The machine […]

Read More

3 October 2016

Orbital Parts Washer

by bettereng1neer1ng / No Comments

The Cyclojet 2 is a water-based, precision cleaning system designed to wash screw machine parts and larger parts with blind holes and intricate passageways. This system combines a tumbling/orbital motion with spray and immersion to flush-out chips and strip-off oils from the most complex parts in an average time of 2-15 minutes.

Read More

3 October 2016

Immersion Parts Washer with 6 Baskets

by bettereng1neer1ng / No Comments

This CJ-6 Immersion Washer is designed to clean fittings, tubes and valves manufactured for the HVAC, plumbing, refrigeration and industrial sectors.  The manufacturer needed to clean large batches of small, heavy metal parts that had through holes and blind holes. The immersion washer has 6 baskets with a total load capacity of 420 lbs. that […]

Read More

3 October 2016

Immersion Washer for Small Pipe Fittings

by bettereng1neer1ng / No Comments

The Cyclojet CJ-4 immersion washer rotor was customized to fit the customer’s 5 cubic foot basket with a load capacity of 700 lbs., which holds their various parts such as pipes, fittings, couplings and gaskets.  The system cycles through wash, rinse and dry stages and all wetted parts are stainless steel.

Read More

17 March 2016

Better Engineering Company Profile

by bettereng1neer1ng / No Comments

From Visibly Clean to Microscopically Clean, Better Engineering Mfg. Inc. remains the World Leader in Aqueous Cleaning Systems! Regardless of whether you have a simple or complex cleaning application, whether you require a small or a large system, or if you need a standard parts washer or a customized washing system, Better Engineering has a variety […]

Read More

17 March 2016

Cyclojet Tumbling Cleaning System

by bettereng1neer1ng / No Comments

Using detergents and water, the CYCLOJETS clean and dry parts that other parts washers can’t…  complex screw machine parts and larger parts with blind holes and intricate passage ways. These systems combine a tumbling/orbital motion with spray and immersion to flush-out chips and strip-off oils from the most complex parts.  Parts that can tumble are […]

Read More

12 August 2015

Ultrasonic Washer for Jet Engine Fuel Pumps – Case Study 20185

by bettereng1neer1ng / No Comments

Background: This company is a leading supplier of aerospace components such as propulsion engines, engine controls, landing gear, etc.  In addition to manufacturing new components, they offer repair and rebuilding services. Parts Cleaning Problem: The application is rebuilding jet engine fuel pumps.  In terms of cleaning, this is one of the most difficult and challenging […]

Read More